Back to Top

1
Hi, Guest!

Dwyer 475 MKIII Manometer

Update Terakhir
:
01 / 12 / 2019
Min. Pembelian
:
0 Unit

Harga

CALL
Karya Mandiri Instrument Indonesia adalah supplier peralatan laboratorium baik eletronik maupun mekanik, serta berbagai macam instrument measurement, dengan didukung dari berbagai macam merk dari negara negara Eropa, US, dan beberapa negara di Asia seperti Korea, Japan dan Taiwan.

Detail Dwyer 475 MKIII Manometer


CALL;
A.WIHARTA
081294124885
085778084789
087784022201


Karya Mandiri Instrument indonesia
adalah supplier peralatan laboratorium baik eletronik maupun mekanik, serta berbagai macam instrument measurement, dengan didukung dari berbagai macam merk dari negara negara Eropa, US, dan beberapa negara di Asia seperti Korea, Japan dan Taiwan. Instrument yang kami sediakan seperti : Anemometer, Analitical Balance, Spectrophotometer, pHmeter, Laser survey, Micropipette, Peristaltic Pump, Flame photometer, Water bath heating cooling, Colorimeter, Water Strirer, Viscometer. Freezers, Refractometer, Polarimeter, Sound Level meter, Tachometer. Dll

Kami juga menerima jasa service dan kalibrasi untuk peralatan laboratorium sesuai kemampuan kami.

 

Dwyer Instruments - Series 475: 475-2-FM Mk III Handheld Digital Manometer Case Sold Separately • Measures Positive, Negative and Differential Pressures • Rugged, Extruded Aluminum Case • Lightweight, Fast and Easy to Use • Selectable English/ Metric Units • FM Approved The Dwyer Series 475-FM Mark III Handheld Digital Manometer is ideal for field calibration, monitoring or trouble shooting HVAC systems, clean rooms, or a wide range of other low pressure pneumatic systems. This handy instrument measures positive, negative or differential pressures of air and natural gases. The Series 475-FM is approved and is intrinsically safe for hazardous locations, Class 1, Div. 1, Group A, B, C, D, T4. Its simple operation and easy to read digital display make it an indispensable test instrument for the plant engineer, industrial hygienist and HVAC technician. When used with a Dwyer Pitot tube, the Series 475-FM Mark III can also be used as an air velocity gage. The Series 475-FM Mark III is housed in a durable extruded aluminum case with its solid state circuitry mounted on a tough fiberglass epoxy circuit board. To meet the most demanding applications and to provide stability of instrument reading, the 1 in. w.c. range is compensated for position sensitivity through the use of a unique patented dual sensor system. A standard 9 volt battery provides up to 100 hours of operation. Dual push pads on the front panel control on-off, auto zero, and pressure unit selection. No set-up or leveling. The large 0.42" ; LCD display is easy to read, minimizing data collection errors. Units include a “ low battery” indicator. The pressure sensor used is a highly stable silicon piezoresistive device. Standard connections are dual sized for 1/ 8" or 3/ 16" I.D. vinyl or rubber tubing. Complete instructions are conveniently printed on rear of housing. Specifications Service: Air and compatible combustible gases. Wetted Materials: Call us at ( 888) 886-8185. Accuracy: ± 0.5% F.S., 60 to 78° F ( 15.6 to 25.6° C) ± 1.5% F.S. from 32 to 60° F and 78 to 104° F ( 0 to 15.6° C and 25.6 to 40° C) . Pressure Hysteresis: ± 0.1% of full scale. Pressure Range: English: 0-40.00" w.c., Metric: 9.96 kPa. Maximum Pressure: 10 psig. Temperature Limits: 0 to 140° F ( -17.8 to 60° C) . Compensated Temperature Limits: 32 to 104° F ( -0 to 40° C) . Storage Temperature Limits: -4 to 176° F ( -20 to 80° C) . Display: 0.42" ( 10.6 mm) 4 digit LCD. Resolution: See table below. Power Requirements: 9 volt alkaline battery. Battery not connected. Weight: 10.8 oz ( 306 g) . Connections: Two barbed connections for use with 1/ 8" ( 3.18 mm) or 3/ 16" ( 4.76 mm) I.D. tubing. Two compression fittings for use with 1/ 8" ( 3.18 mm) I.D. x 1/ 4" ( 6.35 mm) O.D. tubing for 475-7-FM & 475-8-FM only. Agency Approvals: FM, CE.

Tampilkan Lebih Banyak
Kontak Kami